Ametek JOFRA CSC200, Reference Manual

Page: 12 / 20

4) Setpoint 1 is the starting default location. You can turn the knob to
change the location (i.e. Setpoint 1, 2, 3).
5) Once a setpoint location has been chosen, press the "Set" key again to
store the output value into that location.
6) Repeat this process for more setpoints (up to three)
7) To recall setpoints simply press the "Recall" key. Each press of the
"Recall" key will retrieve a stored setpoint in sequential order.
6. Specifications
General
Operating Temperature –10°C to 50°C / 14 to 122°F
Storage Temperature –20°C to 60°C / -4 to 140°F
Stability ± 0.005% of reading / °C outside of 23 ± 5°C
Power 1 x 9V Alkaline
Low Battery Indicator 7V (approximate)
Size (Approx.) 188mm x 84mm x 52mm / 7.37in x 3.31 in x 2.05in
Weight (Approx.) 400g / 14oz
Note:
All accuracies stated are for operation at 23°C ±5°C.
For operation below 18°C or above 28°C add ±0.005% of reading/°C (below 64.4°F or
above 82.4°F add ±0.003%/°F)
RTD / Resistance
Resistance Measurement
Range Accuracy
(% of reading ± floor)
Ohms low 0.00
Ω
- 400.0
Ω
0.025% ± 0.05
Ω
Ohms high 401.0
Ω
- 4000.0
Ω
0.025% ± 0.5
Ω
Resistance Source
Range Excitation Current Accuracy
(% of reading ± floor)
Ohms low 5.0
Ω
- 400.0
Ω
0.1mA - 0.5mA 0.025% ± 0.02/ I excitation
5.0
Ω
- 400.0
Ω
0.5mA - 3mA 0.025% ± 0.05
Ω
Ohms high 400
Ω
- 1500
Ω
0.05mA - 0.8mA 0.025% ± 0.5
Ω
1500
Ω
- 4000
Ω
0.05mA - 0.4mA 0.025% ± 0.5
Ω
Note: Unit is compatible with smart transmitters and PLCs.
Frequency response is <= 5ms.
10