Ametek JOFRA CSC200, Reference Manual

Page: 11 / 20

9
Figure 4
5. User Defined Setpoints
One of the unique and time saving features of the CSC200 is the
ability to store user defined setpoints for all output functions. Up to 3
setpoints can be stored for each of the 14 TC and 17 RTD functions.
Stored setpoints will remain in non-volatile memory until changed by
the operator. To store and recall setpoints proceed as follows:
5.1 Storing Setpoints
1) Select an output function (TC or RTD) refer to section 3 and 4.
2) Using the digital adjustment knob and cursor control, set the
output to the value to be stored.
3) Press the "Set" key once. The lower right hand side of the LCD
will display "Setpoint 1"