4
2017-08-10
124745
04
Congratulations on your new JOFRA DTI-1000!
With the AMETEK indicator, you have chosen an extremely effective
instrument which we hope will live up to all your expectations. Over
the past many years, we have acquired extensive knowledge of
industrial temperature calibration. This expertise is reflected in our
products which are all designed for daily use in an industrial
environment. Please note that we would be very interested in hearing
from you if you have any ideas or suggestions for changes to our
products.
This reference manual applies to the following products:
•
DTI-1000 A
•
DTI-1000 B
ISO-9001 certified
AMETEK Denmark A/S was ISO-9001 certified in September
1994 by Bureau Veritas Certification Denmark.
CE-label
Your new temperature calibrator bears the CE label
and conforms to the Electromagnetic Compatibility
(EMC) Directive 2014/30/EU and the Low Voltage
Directive 2014/35/EU and RoHS Recast (RoHS II)
Directive 2011/65/EU*.
* DTI-1000 A / DTI-1000 B from serial no. xxxxxx-00541
1.0 General information
