30
2017-08-10
124745
04
7.0
Maintenance and display error
messages
7.1
Maintenance
The DTI does not require specific maintenance before or after use.
The user may carry out the following procedures himself.
Cleaning surfaces
Use alcohol or water and a soft cloth.
Re-calibrate or change
Use the software in order to re-
coefficients for sensors
calibrate/change the sensor
coefficients (see section 8.0).
Re-calibration of DTI
Use the calibration routines in the
references or analog out
software to re-calibrate the DTI (see
section 8.0).
7.2
Changing batteries
The batteries are placed in the two battery holders shown in the
figure below. The battery holders can be pulled out by pressing the
locks on both sides simultaneously.
RS 232
9VDC
-
200 mA
2 x 4 PCS BATTERIES TYPE AA
Press
