Ametek Drexelbrook IntelliPoint RF RNL Series, Installation And Operating Instructions Manual

Page: 36 / 89

RNLXX1 - IntelliPoint RF Series User's Manual
30
4.13 Equipment Return
In order to provide the best service, any equipment being
returned for repair or credit must be pre-approved by the
factory.
In many applications, sensing elements are exposed to
hazardous materials.
•
OSHA mandates
that our employees be informed and
protected from hazardous chemicals.
•
Material Safety Data Sheets (MSDS)
listing the
hazardous materials to which the sensing element has
been exposed
MUST
accompany any repair.
•
It is your responsibility to fully disclose all chemicals
and decontaminate the sensing element.
To obtain a return authorization (RA#)
, contact the Service
department at + 215-674-1234
.
Please provide the following information:
Model Number of Return Equipment ____________________
Serial Number _________________________________________
Original Purchase Order Number _______________________
Process materials to which equipment has been exposed
_______________________________________________________
MSDS sheets for any hazardous materials
Billing Address ________________________________________
_______________________________________________________
Shipping Address ______________________________________
_______________________________________________________
Purchase Order Number for Repairs _____________________
Please include a purchase order even if the repair is under
warranty. If repair is covered under warranty, you will not be
charged.
Ship equipment freight prepaid to:
AMETEK-DREXELBROOK.
205 KEITH VALLEY ROAD
HORSHAM, PA 19044-1499
COD shipments will not be accepted.