Customer Service 800-528-7411 or 602-470-1414
Page 49 of 68
14.6 System Tab
The System tab has multiple sections for site and program configuration:
Repeaters (Middle):
Some sites may require a separate repeater to reach instruments that are not visible to
the base station radio.
Prior to installing a repeater, setup the repeater with JMS.
Use the [New] or [Edit] button to add or edit a repeater; see
Radio (Right):
Radio Status in the upper left:
•
The status must be "Ready" before JMS can talk to instruments. If necessary, the
[Initialize] button can be selected to initialize the radio again.
•
Key base station radio settings are shown.
The [Edit Settings] button changes program settings; see
For JMS setup, configure the base station radio first.
The [Initialize] button initializes the radio. If the radio was disconnected, the radio can
be initialized again if needed. If the radio has failed, the bottom Radio Status pane will
show "Initialize" to the right of the status, which can be clicked to initialize the radio too.
