Customer Service 800-528-7411 or 602-470-1414
Page 35 of 68
High Temp Alert Message:
The customizable message can be constructed from variable codes that are replaced
when the message is generated.
Use the scroll bar for more variables.
13.6 Repeater Setup
Repeaters relay radio packets between the upstream radio (typically the base station
radio) and a downstream radio (typically an instrument).
The Nano and Spectra 2400 Compatible radio networks work differently:
•
Nano radios do not have separate hopping channels. The base station radio is
always radio address 1. The repeater's Up Address is 1 unless it is sending packets
thru another repeater before reaching the base station radio. Don't forget to check
the Repeaters option in the Radio Settings pane of the System tab on the Settings
form (
§13.2 Settings - System Options
For example:
o
Base station radio is always at address 1. The base station radio talks to
instruments (or repeaters) that have their Up Address set to 1.
o
A repeater with Address 5 and Up Address 1 relays packets between the base
station radio and the instruments with their Up Address set to 5.
