Customer Service 800-528-7411 or 602-470-1414
Page 28 of 68
•
Verify Radio Contact:
o
Ensure that the Radio Status at the screen bottom says “Ready”.
o
Click on an instrument the list on the left.
o
Select the [Sample] button to take a sample.
o
Approximately 40 seconds later, a popup message displays the result.
o
Select the [Poll] button to download the results from the instrument. The new
result can be viewed on the Data Tab.
If you received a sample result back from your Jerome 651, the radios are
communicating normally. If not, check the JMS help or
on resolving communication problems. For assistance, contact Customer Service.
13.2 Settings - System Options
Radio Settings (Far left):
Base station radio settings are configured:
•
COM Port - Set to the serial communications port that is connected to the base
station radio. A straight through DB9 pin cable is used.
•
Radio Model - Select either the "Nano" or "Spectra 2400 Compatible". The "Spectra
2400 Compatible" radio has been used for legacy 651 installations, which is now
obsolete. The Nano and Spectra 2400 Compatible radios cannot be mixed on a
single site.
•
Repeaters (Nano only) - Check this box if there are one or more repeaters on the
site.
