Customer Service 800-528-7411 or 602-470-1414
Page 30 of 68
13.3 Settings - Data Options
Data Handling Settings:
•
Enable automated polling - Enables automated polling based on the specified
interval. Current instrument data is retrieved during polling. Instruments store
readings until the readings are cleared from the instrument.
•
Poll Interval (Minutes) - Set the polling interval based on:
o
How current you want the data
o
How soon you want to be notified of a high reading (if popup or email
notifications are turned on)
•
Days of Data to Display - Controls the amount of days shown on the Graph and Data
tabs. A common value may be a multiple of 7 days; for example: 7, 14, 21, and 28
days.
•
Primary Gas - Select "Mercury (Hg)" or "Hydrogen Sulfide (H2S)" for a 451 or 651
site respectively.
•
Single Reading Alert Level (ppm or mg/m3) - When a single reading exceeds this
level, a popup or email notification is sent if enabled.
•
Average Reading Alert Level (ppm or mg/m3) - When the average reading exceeds
this level, a popup or email notification is sent if enabled.
