AMETEK/PRESTOLITE POWER 193111-038, Owner'S Manual

Page: 11 / 26

193111-038
INSTALLATION
5-2 April 3, 2000
4. Replace the one piece top and sides.
CAUTION: Use of the charger with the
voltage changeover set to the incorrect
service voltage may result in dramatically
reduced performance and life of the charger
and/or battery.
If you don’t know your service voltage,
consult a qualified electrician.
F. Charging Cable Connectors
If connectors are already attached to the charging
cables, make sure that they are attached so the
charger positive polarity will connect to the positive
terminal of the battery.
NOTE: The polarity of the charging cables
on the charger are color coded. The red
cable is positive and the black cable is
negative.
If connectors must be attached to charging cables,
follow instructions supplied with connectors.
CAUTION: Improper connections will
“blow” charger output fuse and may
cause other damage. Loose connections
will reduce charger performance. Be
certain the charger’s positive charging
cable will connect to the positive terminal
of the battery. Make sure connectors are
securely attached to cables (good solder
connections, well tightened set screws or
proper crimp, whichever is applicable.)
G. Connection To AC Power
After reading and following the installation instructions
above, plug the charger AC input plug into the AC
power receptacle.