8
A01-00071 Rev F
www.powervar.com
2.0 SAFETY INSTRUCTIONS
IMPORTANT - SAVE THESE INSTRUCTIONS
THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS.
KEEP THIS MANUAL HANDY FOR REFERENCE.
CAUTION
A battery can present a risk of electrical shock. Short-circuit currents can
be extremely high and can create severe burns as well as the risk of fire or
explosion from vented gases. Always observe proper precautions.
When replacing batteries, use the same quantity, rating and type of batter-
ies used by AMETEK Powervar. The batteries used in this UPM are sealed
lead-acid and are maintenance free. Proper disposal of batteries is required.
Refer to your local codes for disposal of batteries.
UPM Rating
Quantity and Battery Rating
700 VA
4 X 23W @ 12 VOLT
1000 VA
4 X 23W @ 12 VOLT
1440 VA
4 X 23W @ 12 VOLT
2200 VA
8 X 23W @ 12 VOLT
3000 VA
8 X 23W @ 12 VOLT
CAUTION
• This UPM contains voltages which are potentially hazardous. All re-
pairs should be performed by qualified service personnel.
•
To reduce the risk of fire, connect only to a circuit provided with 20 am
-
peres maximum branch circuit over-current protection in accordance
with the National Electric Code, ANSI/NFPA 70.
• The UPM has its own internal energy source (battery). The output re-
ceptacles of the UPM may be live even when the UPM is not connect-
ed to an AC Supply.
