24
98-0156 Rev G
Heatsan Immediate Start
Screen Display
Action
Logged into the system as a user Level
2. The
CURRENT SETUP
screen provides
a way to immediately start the unit. At
any time on pressing
“HEATSAN
IMMEDIATE START”
the following screen
will be displayed.
If an immediate start is desired press
and hold
“YES”
until a single beep is
heard. The
CURRENT SETUP
screen
will be populated with the necessary
times. If
“NO”
is pressed it will return
to the
CURRENT SETUP
screen and
display 00:00 for all times.
NB:
The unit needs to start the Loop
Pre-Heat process within the same day
as the Tank Preheat. If the calculated
“Heatsan Start” exceeds 24:00, then
this error message will come up on
the screen. The message is not sent to
the alarm Log. The message blinks for
10 seconds and then the user is sent
back to the Current Day setup screen.
Summary of Contents for Heatsan 00HS208
