manualshive.com logo in svg

Amerisolar AS-B2 Series, User Manual, Page: 7 / 38

Share
Download
Amerisolar AS-B2 Series User Manual Download Page 7

Worldwide Energy and Manufacturing USA Co., Limited 

 

 

4 

2. Overview                                                                                                                   

This chapter mainly introduces the inverter features, appearance, operation panel, work 

principle, etc. 

2.1 Product Features 

 

  Efficiently power generation: adopt efficient HERIC inverter topology and advanced 

completely digitized control technology. 

 

  Safe and reliable: adopt aluminium alloy to diecast the outer case, so that the inverter can 

work in a widely temperature range. 

 

  Smart manage: smart cloud platform monitor and APP monitor. The inverter supports 

RS485, GPRS and WIFI communication, and can be updated online. 

 

  Green and friendly: small size, easy installation and use, air cooling, low noise. 

 

  Better adaptability: with better grid adaptability, wide reactive power adjusting range. 

2.2 Appearance and Structure 

The appearance of the inverter is as shown in Figure2-1. 

 

 

 

 

 

 

 

 

 

 

 

 

Figure2-1 Appearance of the inverter 

2.2.1 Operation Panel 

 

 

 

 

 

Figure2-2 Operation panel 

Summary of Contents for AS-B2 Series







































Reviews:

No comments