Worldwide Energy and Manufacturing USA Co., Limited
10
2. WIFI/GRPS and smart meter are optional, they are provided according to the contract.
3. The hexagonal wrench is packaged in the AC connector.
CAUTION:If the inverter needs to be stored for a long time after unpacking, it is necessary to
pack the inverter by original package and save properly.
3.4 Installation
The inverter can be installed on the wall or metal holder through equipped installation holder.
CAUTION:Vertical installation is perfect. If it should be tilt, the vertical gradient should not
exceed
±
15
°
.
In this section, we take wall installation as example to illustrate, if you need to install the
inverter on metal installation holder, please adjust the installation step correspondingly.
Step 1 Determine the installation place based on the inverter size (as shown in Figure3-6)
and installation space (as shown in 3.2.3 Installation Space).
Figure3-6 Size (unit: mm)
Step 2 Mark the position of installation holes on the wall according to the dimensions of the
fixing holes of the installation holder (as shown in Figure3-7), and drill 4 holes of
Φ
8.5mm on
the wall according to marked position, as shown in Figure3-8
Figure3-7 Optimized installation size (unit: mm)