AmeriGlide Titan Incline Lift, Installation Manual

Page: 12 / 31

13
BEFORE SERVICING
a) Run a safety brake functional test
b) Check the alarm and E-stop while traveling
c) Check the emergency lighting by cutting the main breaker off, not the cut-
off.
d) Check the underpan safety by lowering the platform and activate the
circuit.
e) Make sure Flaps are working fine, and that the platform will not move if
flaps are down.
f) Double check all structure bolts torques
g) Run a safety test in case of failure
h) Run a couple of complete travels of the elevator.
SAFETY BRAKE TEST
a) Jam the lowering of the vehicule with the means of a 2X4 stud about 1M
long
b) Lower the platform frame against the stud in order to create a chain loose
c) Stay away from the platform trajectory and wipe out the stud with the
means of a rope.
d) Platform must stop in less than 60mm measured along the travel line.
e) Chain must be still loose, meaning the brake really stopped the car.
f) All command must be inhibited
g) Use the manual moving device to lift the platform and release the safety
brake.
h) Rearm the safety brake and the manual reset safety switch
i) Reset the controller