background image

3

SAFE INSTALLATION, USE, AND SERVICE

SAFE INSTALLATION, USE, AND SERVICE

Your safety and the safety of others is extremely important in the 

installation,  use  and  servicing  of  this  water  heater.  Many  safety-

related messages and instructions have been provided in this manual 

and on your own water heater to warn you and others of a potential 

injury hazard. Read and obey all safety messages and instructions 

throughout this manual. It is very important that the meaning of each 

safety message is understood by you and others who install, use or 

service this water heater.

Many safety-related messages and instructions have been provided in this manual and on your own water heater to warn you and others of 

a potential injury hazard. Read and obey all safety messages and instructions throughout this manual. It is very important that the meaning 

of each safety message is understood by you and others who install, use, or service this water heater.

DANGER

WARNING

CAUTION

CAUTION

DANGER indicates an imminently

hazardous situation which, if not avoided,

will result in injury or death.

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible

injury or death. Keep this manual near the water heater.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result

in injury or death.

CAUTION indicates a potentially hazardous

situation which, if not avoided, could result in

minor or moderate injury.

CAUTION used without the safety alert

symbol indicates a potentially hazardous

situation which, if not avoided, could result in

property damage.

All safety messages will generally tell you about the type of hazard, what can happen if you do not follow the safety message, and how 

to avoid the risk of injury.

IMPORTANT DEFINITIONS

• 

Qualified Installer or Service Agency:

Installation  and  service  of  this  water  heater  requires  ability 

equivalent to that of a Qualified Agency (as defined by ANSI 

below) in the field involved. Installation skills such as plumbing, 

electrical supply are required in addition to electrical testing skills 

when performing service.

• 

ANSI Z223.1 2006 Sec. 3.3.83: 

“Qualified Agency”  -  “Any  individual,  firm,  corporation  or 

company that either in person or through a representative is 

engaged in and is responsible for (a) the installation, testing 

or replacement of gas piping or (b) the connection, installation, 

testing, repair or servicing of appliances and equipment; that 

is experienced in such work; that is familiar with all precautions 

required; and that has complied with all the requirements of the 

authority having jurisdiction.”

APPROVALS

APPROVALS

LOW LEAD

CONTENT

              

              

Printed on 7/25/2022 7:17 AM CT

Summary of Contents for Compact 10

























Reviews: