REPAIR PARTS ILLUSTRATION
PARTS REPLACEMENT MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR GAS
16
130931 Rev April ʻ07
ITEM
NO. PARTS DESCRIPTION
1
DRAFTHOOD
2
REDUCER RING (SOME MODELS)
3
BAFFLE
4
COLD WATER DIP TUBE
5
HEAT TRAP (SOME MODELS)
6
ANODE ROD (NOT SHOWN)
7
TEMPERATURE & PRESSURE RELIEF VALVE
8
Drain VALVE
9
THERMOSTAT
10 MAN I FOLD
11 ORIFICE
12 MAIN BURNER
13 BURNER SPREADER
14 THERMOCOUPLE
15 PILOT TUBE
16 PILOTASSEMBLY
17 CLEANOUT PLATE (SOME MODELS)
18 CLEANOUT O RING (SOME MODELS)
19 JACKET CLEANOUT COVER (SOME MODELS)
20 INNER DOOR (SOME MODELS)
21 OUTER DOOR
3
5
7
1
2
4
9
20
21
14
13
12
15
11
18
17
19
8
10
16
LEGEND
Special anode rod (see page 13)
Temperature & Pressure Relief Valve is required, but may
not be factory installed.
It is imperative the replacement main burner, main burner
orifice, manifold, pilot burner, and the thermostat be
ordered for the proper gas type. Natural gas thermostat will
be marked with a 3.5 pressure setting. Propane gas
thermostat will be marked “For L.P. Gas Only.”
FIGURE 8
WHEN ORDERING REPAIR PARTS ALWAYS GIVE THE FOLLOWING INFORMATION: (1 ) MODEL AND SERIAL NUMBER,
(2) TYPE OF GAS, (3) ITEM NUMBER, (4) PARTS DESCRIPTION.
THE ABOVE PARTS MAY BE ORDERED THROUGH YOUR PLUMBER, A LOCAL SUPPLY COMPANY, OR DIRECT FROM
THE FACTORY. PARTS WILL BE SHIPPED AND BILLED AT PREVAILING PRICES AT THE TIME OF SHIPMENT. REFER TO
YOUR WARRANTY FOR FACTORY ADDRESS.
PROPANE GAS THERMOSTAT WILL BE
MARKED FOR LP GAS ONLY
Summary of Contents for 100-83 AS
Page 7: ...130931 Rev April 07 4...
