American Megatrends TPC6000-A2152, User Manual

Page: 80 / 95

TPC6000 ‐ A2152 User Manual
80
4.1 System Maintenance Introduction
If the components of the TPC6000 ‐ A2152 ‐ T fail they must be replaced, such as the wireless
LAN module or the motherboard. Please contact the system reseller or vendor to purchase
the replacement parts. Back cover removal instructions and jumper settings for the
TPC6000 ‐ A2152 ‐ T are described below.
4.2 Motherboard Replacement
In the case of motherboard failure, please contact an NODKA sales representative, reseller
or system vendor. The motherboard is accessible after opening the rear cover.
4.3 Cover Removal
Warning:
Turn off the power before removing the back cover . Risk of electrocution. Severe damage
to the product and injury to the body may occur if internal parts are touched while the
power is still on.
Warning:
Take antistatic precautions when working on the internal components. Some internal
components are easily damaged or destroyed by electrostatic discharge. Take antistatic
precautions to prevent electrostatic discharge.
To replace any of the following components,

Memory module

Wireless LAN module

Inverter
The back cover of the TPC6000 ‐ A2152 ‐ T must be removed. To remove the back cover,
loosen the four silver screws, slide the cover down and then lift to remove.