Chapter 3 Programming the Flash ROM
63
Programming the Flash ROM,
Continued
Beep Codes
The bootblock code produces a series of beeps during Flash ROM
programming to:
•
signify completion of a step (as shown on the previous screen), or to
•
signal an error.
Error beeps are arranged in a coded sequence and have different meanings
depending on when they occur. The error beep codes and when they can occur
are:
Number of
Beeps
Description
1
Insert diskette in floppy drive A:.
2
The AMIBOOT.ROM file was not found in the root
directory of the diskette in floppy drive A:.
3
Base memory error.
4
Flash program successful.
5
Floppy read error.
6
Keyboard controller BAT command failed.
7
No Flash EPROM detected.
8
Floppy controller failure.
9
Boot Block BIOS checksum error.
10
Flash erase error.
11
Flash Program error.
12
AMIBOOT.ROM file size error.
Continuous
beep
Flash Programming successful. Turn power off. The turn
power on again to restart.