manualshive.com logo in svg

American Megatrends Titan III, User Manual, Page: 57 / 72

Share
Download
American Megatrends Titan III User Manual Download Page 57

Chapter 2 WINBIOS Setup

51

PCI/PnP Setup,

 

Continued

DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7 These options specify the bus that the specified DMA channel is used on. The

settings are PnP or ISA/EISA. The Optimal and Fail-Safe default settings are
PnP.

Reserved Memory Size This option specifies the size of the memory area reserved for legacy

ISA adapter cards. The settings are Disabled, 16K, 32K, or 64K. The Optimal
and Fail-Safe default settings are Disabled.

Reserved Memory Address This option specifies the beginning address (in hex) of the

reserved memory area. The specified ROM memory area is reserved for use
by legacy ISA adapter cards.

This option does not appear if the Reserved Memory Size option is set to
Disabled.

The settings are C0000, C4000, C8000, CC000, D0000, D4000, D8000, or
DC000. The Optimal and Fail-Safe default settings are C8000.

Summary of Contents for Titan III









































































Reviews:

No comments