Chapter 2 WINBIOS Setup
47
Power Management Setup,
Continued
IRQ3
IRQ4
IRQ5
IRQ7
IRQ8
IRQ9
IRQ10
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
When set to Monitor, these options enable event monitoring on the specified
hardware interrupt request line. If set to Monitor and the computer is in a
power saving state, AMIBIOS watches for activity on the specified IRQ line.
The computer enters the full on power state if any activity occurs. AMIBIOS
reloads the Standby and Suspend timeout timers if activity occurs on the
specified IRQ line.
The settings for each of these options are Monitor, Both, or Ignore.
The Optimal and Fail-Safe default settings are Ignore for all the above
options except IRQ12, IRQ14, and IRQ15. The Optimal default setting for
IRQ12 is Both. The Optimal default setting for IRQ14 and IRQ15 is Monitor.