Chapter 1 Hardware Installation
17
Step 6 Attach Cables
Connectors
The Titan III PCI EISA motherboard includes many connectors. Connection
instructions, illustrations of connectors, and pinouts are supplied below. A list
of all connectors described in this section follows:
Connector
Power supply connectors P8 and P14
Keyboard connector P9
Mouse connector P13
Reset switch J24
Speaker P24
Keyboard lock connector P17
Turbo LED connector J29
IDE LED connector J22
Serial port connectors P3 and P4
Parallel port connector P12
Floppy connector P11
IDE drive connectors P1 and P2
Cable Connector Ends
When connecting chassis connectors to the motherboard, make sure
to connect the correct connector end. Most connector wires are color-coded.
Match the color of the wires leaving the switch or LED to the same pin on the
connector end. There may be more than one connector with the same color-
coded wires. If so, follow the wire to the switch or LED. All motherboard
components are outlined by a white rectangular box with a broad arrow at one
end. Pin 1 is always at the arrow end of the white outlined box, as shown
below:
Cont’d