American Megatrends Baby Voyager 80486, User Manual

Page: 13 / 83

Super-Voyager LC Motherboard User's Guide
Chapter 2
Installation
Unpacking
Step
Action
1 Inspect the cardboard carton for obvious damage.
If damaged, call American Megatrends Technical
Support at 404-246-8600.
Leave the Super Voyager LC motherboard in its
original packing.
2 Perform all unpacking and installation procedures
on a ground-connected anti-static mat. The
operator should wear an anti-static wristband,
grounded at the same point as the anti-static mat.
Or use a sheet of conductive aluminum foil
grounded through a 1 megohm resistor instead of
the anti-static mat. Similarly, a strip of conductive
aluminum foil wrapped around the wrist and
grounded through a 1 megohm resistor serves the
same purpose.
3 Inside the carton, the Super Voyager LC
motherboard is packed in an anti-static bag, and
sandwiched between sheets of sponge. Remove
the sponge and remove the anti-static bag. Save
the original packing material in case of
reshipment.
4 Place the Super Voyager LC motherboard on a
grounded anti-static surface component-side up.
5 Inspect the motherboard for damage. Do not apply
power to the motherboard if it has been damaged.
6 Press down on all ICs mounted in sockets to verify
proper seating.
7 If the motherboard is undamaged, it is ready to be
installed.