24 - FORM NO. 56041667
American-Lincoln Technology
7765 / 7760
TOW CONTROL
SHAFT
P-5104
FIGURE 21
P-4183
FIGURE 22
HOPPER
LIFT
LEVER
HOPPER
DOOR
LEVER
POST-OPERATION & CLEAN-UP INSTRUCTIONS
TO CLEAN RECOVERY TANK
The large access cover on the recovery tank simplifi es the cleaning process. Once the recovery tank lid is opened, tip out the tank.
With the recovery tank in the tipped out position (fi gure 20), fl ush all sand, sludge, debris, etc. out of the tank with a water hose, then
replace the tank and fl ush the manifold, ball fl oat screen and level switch to remove any deposits. The tank lid should be removed and
cleaned approximately every 50 running hours.
WARNING
Do not attempt to fl ush large amounts of tank debris through the drain hose - This will cause clogging and hamper future
drainage. Always fl ush the recovery tank with clean water at the end of each cleaning cycle. Never let debris accumulate,
settle and harden in the tank, tank lid,
or on associated hardware.
