RM4200 Series User Guide
RM4210 & RM4211 Installation
17
Figure 2-10. Battery Connections
Connect the larger, round battery to the
P4
connection. Connect the bundled pair of batteries to the
P3
connection.
The RM4210 makes a clicking sound after connecting the batteries. This is a normal function and
indicates the unit is powered on.
N
OTE
:
If you are unsure of satellite coverage or if the unit is placed in an area that is heavily covered by
foliage, first check satellite reception by completing the steps in the
When finished, complete the installation procedures.
10
Place the RM4210 onto the test station adapter, carefully wrapping the wiring harness inside the dome.
Align the cut-out below the Bullhorn label on the dome to the screw (next to blue dot) on the adapter.
