16
Liquid Propane Gas Units
Operation
* Do not attempt to disconnect the gas regulator or any gas fitting while your fire pit is in operation.
* A dented or rusty liquid propane cylinder may be hazardous and should be checked by your gas supplier prior to use.
* Do not use a liquid propane cylinder with a damaged valve and any other worn out parts.
* Transport and store the empty gas cylinders carefully and properly.
* If you see, smell or hear the hiss of escaping gas from the liquid propane cylinder:
1. Turn off the gas supply and get away from the gas cylinder and the fire pit at once.
2. Do not attempt to correct the problem yourself.
3. Get to your gas supplier and/or the fire department for help.
CAUTION:
Children and adults should be alerted to the hazards on high surface temperatures and should stay away to
avoid burns or clothing ignition. Young children should be carefully supervised when they are in the area of the appliance.
WARNING:
Do not use this appliance if any part has been underwater. Immediately call a qualified service technician
to inspect the appliance and to replace any part of control system and any gas control, which has been underwater.
SAFETY WARNINGS
1. Never leave the Fire Pit unattended during operation.
2. Clothing or other flammable materials should not be placed on or near the appliance.
3. Any guard or other protective device removed for servicing the appliance must be replaced prior to operating the appliance.
4. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at
least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative the
control compartment, burners and circulating air passageways of the appliance be kept clean.
5. Inspect the fuel supply connection before each use of the appliance.
6. Temporary storage of this appliance indoors is permissible only if it has been disconnected from its fuel supply
(Natural or L.P. gas line).
WARNING
1. This appliance is hot when operated and can cause sever burns.
2. Do not burn any solid fuels in this appliance.
INITIAL START UP
1. Turn gas ON. Ensure you have leak tested the fire pit before operating.
2. When using the standard battery pack, ensure batteries are installed and the Fire Pit is ready to operate.
3. Press ignitor button. You will hear the ignitor probe sparking, light the gas and fire pit will come on.
WARNING:
Do not
stand over Fire Pit during ignition or operation due to high surface temperatures.
Warning
Screen
DO NOT PLACE LAVA ROCKS
ON THE SCREEN. KEEP
SCREEN CLEAR.
This screen must be clear and free of obstructions at
all times to insure proper operation.
