![background image](http://html1.mh-extra.com/html/american-fire-glass/ob-afpp-18eips-lp/ob-afpp-18eips-lp_installation-and-operating-instructions-manual_2924459011.webp)
10
Glass Crystals Installation Guidelines
Glass Requirement
Glass Crystal Placement
A.
Carefully inspect the carton for shipping damage. If any parts are missing or damaged, call your dealer.
Do not
attempt
to install the appliance unless all parts are in good condition.
B.
Correct installation is crucial to safe performance of your Outdoor Fire Pit.
C.
Replacement parts available from your local retailer
CAUTION - Cuts may occur from the sharp edges on glass. Use safety gloves during the
placement of glass.
and #2). These instructions apply to round, rectangular, and linear burners.
CAUTION: BURN HAZARD. GLASS CRYSTALS
WILL REMAIN HOT FOR SOME TIME AFTER USE.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE
PIT. IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
Top View
Figure 1
Figure 2
Part Number
Part Number
Part Number
Glass (lbs)
Glass (lbs)
Glass (lbs)
RECTANGLE
LINEAR
ROUND
SS/OB-AFPP-18EIPS-LP
SS/OB-AFPP-24EIPS-LP
SS/OB-AFPP-30EIPS-LP
SS/OB-AFPP-36EIPS-LP
SS/OB-AFPP-48EIPS-LP
15
25
40
60
95
SS/OB-LCB-30EIPS-LP
SS/OB-LCB-36EIPS-LP
SS/OB-LCB-48EIPS-LP
SS/OB-LCB-60EIPS-LP
SS/OB-LCB-72EIPS-LP
25
35
40
50
60
SS/OB-RSP-19EIPS-LP
SS/OB-RSP-25EIPS-LP
30
50