![background image](http://html1.mh-extra.com/html/american-fire-glass/ob-afpp-18eips-lp/ob-afpp-18eips-lp_installation-and-operating-instructions-manual_2924459014.webp)
13
Operating The Unit - Lighting And Extinguishing
Electronic Ignition Lighting Instructions
For your safety, read before lighting
WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT,
CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE.
A.
BEFORE LIGHTING,
smell all around the unit
area
because
some gas is heavier than air and will settle on the
B.
WHAT TO DO IF YOU SMELL GAS
1. Shut off the gas to the appliance.
2.
3. If odor continues, immediately call your
1. STOP!
Read the safety information above.
2. Push and slowly turn the control knob to the HIGH
position.
(See P1)
3.
Hold ignitor to light the pilot, release control knob
after 45 seconds. (see P1)
4.
be 3 to 13 inches high. (see P2)
5.
If the burner does not light, immediately turn the
control knob to the OFF position.
6.
gas, and repeat steps 1-4 above.
7.
If your burner fails to light again, turn the control
knob to the OFF position and contact your dealer
or gas supplier.
8.
To extinguish your gas burner, turn the control
knob to the OFF position. Be sure the control knob
is turned fully off to avoid any gas leakage.
C.
Use only your hand to push in or turn the gas
control knob. Never use tools. If the knob will not
push in or turn by hand, DO NOT try to repair it.
Call