Web Configuration
3-9
Controlling the Pan-Tilt Control via Mouse
Procedure 3-4 Controlling dome Pan-Tilt via a mouse using the Live Video page
1
Select
in the camera’s pane.
2
Float the cursor over the center of the video pane. The Cursor Origin Mark
appears.
3
Click and drag the cursor to set the direction and speed, then release.
• The camera’s movement speed increases proportionally with the arrow’s distance from the
cursor origin mark.
• The camera’s direction is relative to cursor origin mark.
Note
Varied speed relative to distance from the cursor origin mark is only available if it is supported
by the camera and implemented in the PTZ protocol.
Zoom via Mouse Scroll Wheel
Procedure 3-5 Zooming a dome via the mouse scroll wheel using the Live Video
page
1
Point the camera at a target.
2
Scroll the mouse wheel forwards (zoom in) and backwards (zoom out).
Pattern and Preset Camera Controls
A Preset is a pre-positioned camera scene that you program for cameras installed with pan/tilt and
motorized lens capability. A Pattern is a sequence of pan, tilt, zoom, focus and iris movements
from a single, programmable dome. The dome learns these movements during programming for
later execution.
Note
Preset and Pattern appear only if they are set up for the selected camera. Use Intellex, Network
Client, a Touch Tracker, or the Live View page to program presets and patterns.
Summary of Contents for VideoEdge
