Intellex
®
Digital Video Management System Installation and Operating Instructions
29
Camera Setup
MORE>>>
CAMERA SETUP
The Camera Setup screens let you define the name and
termination settings for each camera. You must possess the
Setup
Cameras
1.
From the main screen, click the
Setup
button. The
Setup
Options
screen appears (see
).
2.
Click the
Cameras
button. The
Names
screen (the first
Camera Setup screen) appears.
Use the
Names
screen to define the name of each camera. These
names are displayed when viewing live images and are stored in
the image database with recorded images.
1–8 —
Use the mouse pointer to highlight one of the current
camera names. Then use the virtual keyboard or the physical
keyboard (if attached) to enter the new name, up to 10 characters.
The default names are
Camera1
through
Camera8
. Cameras 9–
16 not used.
Click
OK
to accept the new camera names, as well as any changes
on the other Camera Setup screen. Click
Cancel
to cancel the
changes.
CAUTION: If you set the termination switch at 75 ohms, you
MUST select “Hi-Z” in the Intellex Setup Options screen.
If you select “75 ohms” in the Intellex Setup Options
screen, you MUST use the “infinity” symbol setting on the
termination switch (consult
System Setup, Setup Options
Screen
).
When set to
75 Ohms
, the unit terminates the camera. Selecting
Hi-Z
is the same as removing a terminator from the camera. The
default is
75 Ohms
.
Click
OK
to accept the new termination settings, as well as any
changes on the other Camera Setup screen. Click
Cancel
to
cancel the changes.
