American Dynamics Intellex DV8000 Installation And Operating Instructions Manual Download Page 42

Page: 42 / 155

Intellex

Digital Video Management System Installation and Operating Instructions

Schedule Setup

MORE>>>

Setup —

Select a filter; then click

Setup

to configure it (see

Live

Filter Configuration

Select another Regular Schedule Setup Option for configuration.
Otherwise, click

to accept the new day/night filter settings,

as well as any changes on the other Regular Schedule Setup
screens, and return to the

Setup Options

screen. Click

Cancel

cancel the changes and return to the

Setup Options

screen.

Regular Schedule Popup

The regular schedule popup menu provides access to several
regular schedule configuration options.

NOTE: The popup menu will not appear unless a filter name

appears in one of the filter fields.

Move the mouse pointer over either the

Day Filter

or the

Night Filter

next to a camera name.

Click the right mouse button. The regular schedule popup
menu appears (one or more options may not be available).

Setup —

Use this option to configure the selected filter for this

camera. This option operates the same as pressing the

Setup

button.

NOTE: Before you can configure a filter, you must record at least

one image from the camera. Until an image is recorded,
the filter options are disabled.

Select the filter to configure.

Click the right mouse button to display the regular schedule
popup menu.

Select

Setup

. The appropriate filter screen appears.

Summary of Contents for Intellex DV8000




























































































































































Search results

Summary of Contents for Intellex DV8000

Reviews:

Related manuals for Intellex DV8000

Brands by name

Popular brands

American Dynamics Intellex DV8000, Installation And Operating Instructions Manual

Search results

Summary of Contents for Intellex DV8000

Reviews:

Related manuals for Intellex DV8000

Brands by name

Popular brands