Intellex
®
Digital Video Management System Installation and Operating Instructions
41
Schedule Setup
MORE>>>
Select another Regular Schedule Setup Option for configuration.
Otherwise, click
OK
to accept the new start times, as well as any
changes on the other Regular Schedule Setup screens, and return
to the
Setup Options
screen. Click
Cancel
to cancel the changes
and return to the
Setup Options
screen.
Regular Cameras Setup
NOTE: You must have purchased the Smart Pack option to use
the
functions.
Use the
Cameras 1–8
screen to configure a live filter for each
camera, one for daytime and one for nighttime operation. If you
configure a filter and activity is detected (for example, motion in
the target area of the motion detection filter), the unit records
images from the camera at the record rate specified in the Alarm
Setup screens.
Cameras —
All camera names are listed down the left side of the
screen in camera order.
NOTE: Before you can configure a live filter, you must record at
least one image from the camera. Until an image is
recorded, the filter options are disabled.
Day Filter —
Use this option to select a live filter for this camera
during daytime operation. The default is
None
.
1.
Click down arrow. A list of filters appears.
2.
Click the desired filter. Select
None
to disable any previously
configured filters.
3.
Click
Setup
to configure the filter (see Setup
below).
Night Filter —
Use this option to select a filter for this camera
during nighttime operation. The default is
None
.
1.
Click down arrow. A list of filters appears.
2.
Click the desired filter. Select
None
to disable any previously
configured filters.
3.
Click
Setup
to configure the filter (see Setup
below).
