Chapter 4: Utilities and Advanced User Tasks
4-5
The following message appears on the display:
Push Tracker Ball Up
5.
Push the Tracker Ball away from you.
The following message appears on the display:
Release Tracker Ball
6.
Release the Tracker Ball.
Tracker Ball calibration is complete.
Displaying Calibration Values
To display the Tracker Ball calibration values, do the following:
1.
Use the number buttons to type
34
, then press
Calibrate
.
Information similar to the following will appear on the LCD:
LD2 R00 UD6 D9D
10 10 10 10
2.
Press
LCD Clear
to refresh the LCD.