1-6
Operator's Manual
22.
Iris Close (PG-UP)
button allows less
light into a camera controlled by the T
OUCH
T
RACKER
. Refer to Chapter 3 for additional
details. The Iris Close button also serves as
the
Page Up
function during menu
programming.
23.
Prog
button is used to program monitor
tours and other system programming
features. Refer to the system operating
instructions for additional information. This
button is under system lock protection.
24.
Site
button controls satellite systems. Refer
to the system operating instructions for
additional information.
25.
Shot Set / Shot Call
buttons create and
display pre-defined scenes from a specified
camera. The
Shot Set
button creates the
pre-defined scenes and is under system lock
protection. The
Shot Call
button displays
the pre-defined scenes.
26.
User
button allows authorized users to log
on to the system. Refer to the system
operating instructions for additional details.
27.
Display
button is used to call up the main
menu of the attached switching system. It
also enables the use of the menu
programming buttons. This button is under
system lock protection.
28.
Auxiliary On / Auxiliary Off
buttons
activate and deactivate features such as
lights, locks, or alarms that can be
controlled by the T
OUCH
T
RACKER
. Refer to
Chapter 3 for additional information.
29.
F2
button is a function key whose use is
determined by the system to which it is
connected. Refer to the system operating
instructions for additional information.
30.
F1
button is a function key whose use is
determined by the system to which it is
connected. Refer to the system operating
instructions for additional information. The
F1 button also serves to set the baud rate
and display the firmware version of the
T
OUCH
T
RACKER
. For information about
setting the baud rate or displaying the
firmware version, refer to Chapter 4.
