3-6
Operator's Manual
3.
Use the number buttons to assign a number to this shot, then press
Shot
Set
.
You can now display this shot using the
Shot Call
button.
Viewing Preset Shots
The
Shot Call
button on the keypad allows you to call up the preset shots
that have been defined for cameras.
The following procedure describes how to display a preset shot.
1.
Use the number buttons to enter the number of the camera whose shot
you want to display. Then press the
Cam
button.
2.
Use the number buttons to enter the number of the shot you want to
display, then press the
Shot Call
button.
The camera will immediately point to the preset shot, then zoom and focus
automatically.
Running Monitor Tours
A monitor tour is a selected sequence of camera video inputs, with selected
dwell times, to be displayed on the called monitor. The
Prog
button is used
to define the monitor tour. The
Run
button is used to initiate the monitor
tour. The
Prog
button is under system lock protection; the
Run
button can
be accessed by all users.
Depending on the system setup and monitor tour selected, the monitor either
continuously displays a series of video inputs or displays a sequence and
holds on a selected camera input. To pause the monitor tour, press the
Hold
button. This will allow you to use the
Next
and
Last
buttons to manually
step through the series of cameras in the sequence.
Because the T
OUCH
T
RACKER
works with all current models of American
Dynamics switches, you should refer to the system operating instructions for
more information about setting up and running monitor tours.
