Chapter 4: Utilities and Advanced User Tasks
4-3
When a monitor is disarmed, the camera video from alarms is not displayed
when an alarm has been triggered. To disarm the monitor, do the following:
1.
Enter the number of the monitor, then press the
Mon
button.
2.
Enter the display/clearance type, then press the
Mon Arm Off
button.
For specific information about arming and disarming monitors, refer to the
appropriate operating instructions for your system.
Once a monitor is armed for alarm display, the
Run
,
Hold
,
B-PAS
,
Next
,
and
Last
buttons are used to control the Alarm Tour. Press
Run
to start the
Alarm Tour of the inputs in an abnormal state. Press
Hold
to pause the
Alarm Tour. Press
Next
to step forwards through an Alarm Tour that is on
hold; press
Last
to step backwards through an Alarm Tour that is on hold.
Press
B-PAS
to remove a camera from the active Alarm Tour.
For additional information about Alarm Tours, refer to the appropriate
operating instructions.
Displaying the Switching System Main Menu
NOTE
This function can only be performed with the system lock disabled. To
disable the system lock, refer to Chapter 2 “Getting Started.”
The
Display
button allows you to view the main menu of the attached
switching system. When the main menu for the switching system has been
displayed, the functions associated with the dual function buttons are
enabled. These functions are: PG DN, PG UP, Exit, Enter, Cursor Left (
←
),
Cursor Right (
→
), Cursor Up (
↑
), and Cursor Down (
↓
).
For information about the what tasks you can do from the main menu, refer
to the appropriate system's operating instructions. When you complete using
the main menu, press
Display
. The dual function buttons will return to their
normal operation.
