American Dryer Corp. AD-202, Operation Manual, Page: 52 / 62

48 American Dryer Corp. 113289 - 6
SECTION VII
DATA LABEL INFORMATION
STANDARD LABEL
When contacting American Dryer Corporation , certain
information is required to ensure proper service/parts
information from
ADC . This information is on the data
label that is affixed to the left side panel area behind the top
control (access) door. When contacting
ADC , please have
the model number as well as the serial number readily
available.
1.
MODEL NUMBER – Describes the size of the dryer and
the type of heat (gas, electric, or steam).
2. SERIAL NUMBER – Allows the manufacturer to gather
information on your particular dryer.
3. TYPE OF HEAT – This describes the type of heat for
your particular dryer, gas (either natural gas or liquid
propane [L.P.] gas), electric, or steam.
4. HEAT INPUT (for GAS DRYERS) – This describes the
heat input in British thermal units per hour (Btu/hr).
5. ORIFICE SIZE (for GAS DRYERS) – Gives the number
drill size used.
6. ELECTRIC SERVICE – This describes the electric
service for your particular model.
7. GAS MANIFOLD PRESSURE (for GAS DRYERS) – This
describes the manifold pressure taken at the gas valve
tap.
CE LABEL
AGA LABEL