©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 17
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
X-Move Laser
Cleaning
X-Move Laser™
DMX Traits
Channel Value
Function
5 MOVING HEAD MOVEMENT
71 - 91 MOVEMENT 4
92 - 112 MOVEMENT 5
113 - 133 MOVEMENT 6
134 - 154 MOVEMENT 7
155 - 175 MOVEMENT 8
176 - 196 MOVEMENT 9
197 - 217 MOVEMENT 10
218 - 238 MOVEMENT 11
239 - 255 MOVEMENT 12
6 0 - 255 MOVEMENT SPEED FAST - SLOW
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 18
X-Move Laser™
Trouble Shooting
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2.
Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
X-Move Laser™
Fuse Replacement
pages 16-17 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttonS until you find your desired show,
and press ENTER.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Tap the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER.
X-Move Laser™
Operation
X-Move Laser™ UC3 Control
The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
X-Move Laser™
DMX Traits
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 15
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 16
Channel Value
Function
1
0 - 255
PAN
2 0 - 255 TILT
3 LASER PATTERNS
0 - 12 PATTERN 1
13 - 24 PATTERN 2
25 - 36 PATTERN 3
37 - 48 PATTERN 4
49 - 60 PATTERN 5
61 - 72 PATTERN 6
73 - 85 PATTERN 7
86 - 97 PATTERN 8
98 - 109 PATTERN 9
110 - 121 PATTERN 10
122 - 133 PATTERN 11
134 - 145 PATTERN 12
146 - 157 PATTERN 13
158 - 170 PATTERN 14
171 - 182 PATTERN 15
183 - 194 PATTERN 16
195 - 206 PATTERN 17
207 - 218 PATTERN 18
219 - 230 PATTERN 19
231 - 242 PATTERN 20
243 - 255 PATTERN 21
4 LASER MOVEMENT
0 - 15 LASER OFF
16 - 239 LASER PATTER MOVEMENT
FAST - SLOW
240 - 255 LASER ON/NO MOVEMENT
5 MOVING HEAD MOVEMENT
0 - 7 NO FUNCTION
8 - 28 MOVEMENT 1
29 - 49 MOVEMENT 2
50 - 70 MOVEMENT 3
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
Stand B y
Blackou t on
Function
discontinu ous
line effect
Show m ode
1-4
Mode
LED off
LED on
Select Pattern
LED blinking
