©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 13
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - X-Move Laser Instruction Manual Page 11
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE:
In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to “
SL 2
”, the
fixtures will now have contrast movement to each other.
SOUN -
Sound Active mode.
1.
Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
I PAN -
Pan Inversion
1. Tap the MENU button until “
I PAN
” is displayed, press ENTER.
Either “NO” or “I” will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until “
I”
is displayed, press ENTER to confim. To deactivate Pan
inversion, select “NO” and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until “
I TLT
” is displayed, press ENTER.
Either “NO” or “I” will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until “
I
” is displayed, press ENTER to confim. To deactivate Tilt
inversion, select “NO” and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1.
Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
-
This function will reverse the display 180º.
1. Tap the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “
VER
” is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset
X-Move Laser™
System Menu
X-Move Laser™
System Menu
X-Move Laser™
System Menu
Operating Modes:
The X-Move Laser™ can operate in three
different modes. In each mode you can run the fixture as a
stand alone fixute or in a master/slave confiugration. This next
section will detail the differences in the operating modes.
• Sound Active mode -
The
fixture
will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of four shows that you choose.
• DMX control mode -
This function will allow you to control
each individual fixtures traits
with a standard DMX-
512 controller such as the
Elation
®
Show
Designer.
™
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button.
3. On the slave units
tap the MENU button until “
SLND
” is dis-
played, and Press ENTER. Choose either
“
SL 1
” or “
SL 2
” and
press ENTER. Please see page 11 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-
512
controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The X-Move Laser™ is a six DMX channel DMX fixture. See
X-Move Laser™
Operation
