![background image](http://html1.mh-extra.com/html/american-dj/vizi-roller-beam-2r/vizi-roller-beam-2r_user-instructions_2923238011.webp)
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 20
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 21
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Last Run Time” is displayed,
and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the last running
time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Hours - This will allow you to check the running time of the
lamp.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Hours” is displayed, and
press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the lamp run-
ning time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Off Time - This will allow you to check the running time of the
lamp the last time that the lamp was On.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Off Time” is displayed,
and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the running
time of the lamp the last time that the lamp was On.
5. Press ENTER or press MODE/ESC to exit.
Last Run Password - This will display the timer password.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Last Run Password” is dis-
played, and press ENTER.
4. The “Last Run Password” is 038.
5. Press ENTER or press MODE/ESC to exit.
Clean Last Run - This will allow you to clear the last run time of the
unit. You need to put in the Last Run Password before doing this.
Please see the section before this.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Clean Last Run” is displayed,
and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Lamp Time Password - This will display the lamp timer password.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
Vizi Roller Beam 2R
System Menu
Vizi Roller Beam 2R
System Menu