![background image](http://html1.mh-extra.com/html/american-dj/vizi-led-spot/vizi-led-spot_user-instructions_2923237008.webp)
American DJ
®
- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 16
American DJ
®
- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 15
Vizi LED Spot
System Menu
RPAN (REVERSE PAN) MENU -
ON/OFF
- When “On” is chosen it will reverse the pan.
RTILT (REVERSE TILT) MENU -
ON/OFF
- When “On” is chosen it will reverse the tilt.
FINE MENU -
ON/OFF
- Switch between 8bit (coarse) and 16bit (fine) pan & tilt
movement. This also switches the DMX channel mode between
10 channel (8 bit) and 12 channel (16 bit) DMX mode.
DEGR MENU -
540/630
- Switch the degree of the Pan between 630 and 540.
MIC MENU -
M-01-M-70
- With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU
(DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON
- Display will turn off in 2 minutes.
FLIP
- “Flips” the digital display 180º.
LOCK
- When activated the buttons will lock automatically. See
page 25 for more information.
SPEC MENU -
RDMX
- Lets you adjust the DMX address via external controller.
SPOT
- This provides a spot beam for better lamp optimization.
DFSE
(Default Settings) - Resets the unit to the default settings.
FEED
- Pan/Tilt feedback (error correction) on/off.
FANS
- Select the fan running mode.
VER
(Version) - Displays the software version
ADJU
- Calibration functions
Vizi LED Spot
System Menu
ADDRESS MENU -
AOO1 - A511
(Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX
(Test) - Tests the functions of each channel.
Note: Some channels cannot be tested.
PLAY MENU -
RUN
- Runs the unit as a “master” or in a stand alone mode. The
unit will run a internal program mode.
AUDI
(Audio) - Runs the unit as a “master” or in a stand alone,
sound active mode.
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Hold” - This is the default setting, which in case the signal is
lost the fixute will “hold” at the last setting.
• “Close” - The fixture will return to its “home” standing.
• “Auto” - The fixture will go into Auto mode and run a pre-pro-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
RESE (RESET) MENU -
ALL
- Resets all the motors in the unit.
SCAN
- Resets the motors that control pan/tilt.
COLR
(Color) - Resets the color motors.
GOBO
- Resets the gobo motors.
OTHR
- Resets all other motors.
TIME MENU -
LIFE
- Displays the fixtures total running time.
CLMP
- Clears the fixture running time.