American DJ Vizi LED Spot User Instructions Download Page 10

Page: 10 / 26

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 20

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 19

Vizi LED Spot

System Menu

“

AUDI

”. “

HOLD

” is the default setting.

5. Select the mode that you want the fixture to run in case of a
lost DMX signal and press ENTER.

RESE

MAIN MENU -

ALL

- When you activate the reset function, the fixture will

begin the reset motion, reseting all motors.

1. Access the main menu.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

ALL

” is displayed.

4. Press ENTER to reset all motors, or press MODE/ESC to
cancel and return to the main menu.

SCAN

- When you activate this reset function, the fixture

will only reset the pan/tilt motor.

1. Access the main menu.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

SCAN

” is displayed.

4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.

COLR

- When you activate this reset function, the fixture

will only reset the color wheel motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

COLR

” is displayed.

4. Press ENTER to reset the color wheel motor, or press MODE/
ESC to cancel and return to the main menu.

4. Press MODE/ESC to exit.

PLAY

MAIN MENU -

RUN

Run the unit in an Auto mode as a “master” in a

Master/Slave configuration, or as a stand alone unit -

1. Access the main menu.
2. Tap the UP button until “

PLAY

” is displayed, press ENTER.

3. Tap the UP button until “

RUN

” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “

MSTR

” or

“

ALON

“, select your choice by pressing ENTER, “

PASS

” will flash

in the display and fixture will begin its function.

AUDI

Run the unit in Sound Active mode as a “master”, or

as a stand alone unit -

1. Access the main menu.
2. Tap the UP button until “

PLAY

” is displayed, press ENTER.

3. Tap the UP button until “

AUDI

” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “

MSTR

” or

“

ALON

“, select your choice by pressing ENTER, “

PASS

” will flash

in the display and fixture will begin its function.

AUTO

This is a precaution mode in case you lose the DMX

signal. The fixtue has 4 modes to choose from, please see

page 15 for a description of the 4 modes -

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

PLAY

” is displayed, press ENTER.

3. Tap the UP button until “

AUTO

” is displayed, press ENTER.

4. Now you can choose between “

CLOSE

”, “

HOLD

” “

AUTO

”, or

Vizi LED Spot

System Menu

Summary of Contents for Vizi LED Spot



























Search results

Summary of Contents for Vizi LED Spot

Reviews:

Related manuals for Vizi LED Spot

Brands by name

Popular brands

American DJ Vizi LED Spot, User Instructions

Search results

Summary of Contents for Vizi LED Spot

Reviews:

Related manuals for Vizi LED Spot

Brands by name

Popular brands