American DJ Vizi LED Spot User Instructions Download Page 11

Page: 11 / 26

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 22

American DJ

- www.americandj.com - Vizi LED Spot - Instruction Manual - Page 21

Vizi LED Spot

System Menu

GOBO

- When you activate this reset function, the fixture

will only reset the gobo wheel motor.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

GOBO

” is displayed.

4. Press ENTER to reset the gobo wheel motor, or press MODE/
ESC to cancel and return to the main menu.

OTHR

- When you activate this reset function, the fixture

will reset all other motors that are not listed in RESET

menu.

1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “

RESE

” is displayed, press ENTER.

3. Tap the UP button until “

OTHR

” is displayed.

4. Press ENTER to reset all other motors, or press MODE/ESC
to cancel and return to the main menu.

TIME

MAIN MENU -

LIFE

- With this function you can display the total running

time of the unit.

1. Access the main menu.
2. Tap the UP button until “

TIME

” is displayed, press ENTER.

3. Tap the UP button until “

LIFE

” is displayed, press ENTER.

4. Press MODE/ESC to return to the main menu.

CLMT

- With this function you can clear the running time of

the unit.

1. Access the main menu.

Vizi LED Spot

System Menu

2. Tap the UP button until “

TIME

” is displayed, press ENTER.

3. Tap the UP button until “

CLMT

” is displayed, press ENTER.

4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.

RPAN

MENU -

RPAN

The movement of the Pan will be reversed.

1. Access the main menu.
2. Tap the UP button until “

RPAN

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.

RTILT

MENU -

RTILT

The movement of the Tilt will be reversed.

1. Access the main menu.
2. Tap the UP button until “

RTILT

” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “

” to acti-

vate this function, or “

OFF

” to deactivate this function.

4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.

Summary of Contents for Vizi LED Spot



























Search results

Summary of Contents for Vizi LED Spot

Reviews:

Related manuals for Vizi LED Spot

Brands by name

Popular brands

American DJ Vizi LED Spot, User Instructions

Search results

Summary of Contents for Vizi LED Spot

Reviews:

Related manuals for Vizi LED Spot

Brands by name

Popular brands