©
American DJy
®
- www.americandj.com - Profile Panel RGB™ User Manual Page 10
©
American DJ
®
- www.americandj.com - Profile Panel RGB™ User Manual Page 9
Profile Panel RGB™ Operating Instructions
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
RGB Mode:
In this mode you can select either red, green, blue, or adjust the col-
ors to make a deisred color, which will remain static. Adjust the inten-
sity of each color to make your desired color.
1. Plug the fixture in and press the MODE button until either “R”, “G”,
or “B” is displayed.
2. Press the UP or DOWN buttons to adjust the intensity of the dis-
played color. When you have adjusted your desired color press
MODE to scroll to the next color.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
DMX Mode:
There are seven DMX Modes to choose from: 2 Channels, 3 Channels,
4 Channels, 6 Channels, 7 Channels, 24 Channels, or 27 Channels.
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs.
1. This function will allow you to control each individual fixture’s traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode, plug in the fixture via the XLR con-
nections to any standard DMX controller. Select your desired DMX
mode, and then press the UP or DOWN buttons to adjust the DMX
address.
3. To run the 2 Channel Mode, press the MODE button until “1000”
is displayed. This is the DMX addressing for the 2 Channel Mode.
4. To run the 3 Channel Mode, press the MODE button until “2000”
is displayed. This is the DMX addressing for the 3 Channel Mode.
5. To run the 4 Channel Mode, press the MODE button until “3000”
is displayed. This is the DMX addressing for the 4 Channel Mode.
6. To run the 6 Channel Mode, press the MODE button until “4000”
is displayed. This is the DMX addressing for the 6 Channel Mode.
7. To run the 7 Channel Mode, press the MODE button until “5000”
is displayed. This is the DMX addressing for the 7 Channel Mode.
8. To run the 24 Channel Mode, press the MODE button until “6000”
is displayed. This is the DMX addressing for the 24 Channel
Mode.
Button
Function
ST AND BY
open or close screen(screen closed LED 1 light,screen open LED1
off)
FUNCTION
adjust strobe or program speed
MODE
change A-00~A-24
Profile Panel RGB™ UC3 Control
Profile Panel RGB™ Operating Instructions
9. To run the 27 Channel Mode, press the MODE button until “7000”
is displayed. This is the DMX addressing for the 27 Channel
Mode.
10. Please see pages 11-18 for DMX values and traits.
