©American DJ® - www.americandj.com - Orbitron™ Instruction Manual Page 19
©American DJ® - www.americandj.com - Orbitron™ Instruction Manual Page 20
Orbitron™
DMX Traits
The chart below details the DMX traits in depth. The individual trait
can only be accessed by using an universal DMX controller. Note: The
gobo patterns can be found on the next page.
ORBITRON
DMX TRAITS
CHANNEL 1
255
00
PAN
255
00
0 degree
335 degree
CHANNEL 2
00
00
255
TILT
255
0 degree
335 degree
CHANNEL 3
CHANNEL 4
LAMP
255
255
Lamp Off - 00
00
01
255
Lamp On
BARREL
00
00
Speed Fast 60 RPM - 01
Stop
00
01-127
Barrel - CCW
Speed Slow 1 RPM - 127
Speed Slow 1 RPM - 129
129-255
Speed Fast 60 RPM - 255
255
Stop - 128
128
Barrel - CW
255
The Orbitron ships with a built-in rigging point and two large holes in
the base of the unit that are to be used for safety cables. The rigging
point is located on the bottom of the unit. This rigging point is secured
to the fi xture by two large Phillips screws. When the rigging point is
not to be used and when the fi xture is shipped from the manufacture,
the point is shipped inverted. When the fi xture is to be hung by truss
or other means, please use the rigging point and secure the fi xture
with safety cables. Always be sure to fi rmly secure the rigging point to
the unit. The Orbitron™ can be mounted to a wall or may hung from
truss.
Orbitron™
Mounting
Orbitron™
Fuse & Lamp Replacement
with halogen lamps.
Never touch the new lamp with your bare
fingers.
2. Remove the thumb screw on the rear of the unit’s head. This
screw hold the lamp socket cover in place.
3. Pull back the cover once the screw has been removed to access
the socket assembly.
4. Carefully remove the old lamp and discard it in the trash.
5. Replace the lamp with an exact match and reassemble.
Thumb Screw
Lamp Cover
Lamp Socket
Assembly
