background image

©American DJ®  -  www.americandj.com  - Orbitron™ Instruction Manual Page 3

  Orbitron™  

 

 

       Safety Precautions

©American DJ®  -  www.americandj.com  - Orbitron™ Instruction Manual Page 4

Safety Issues:

 This unit may blow a fuse if the maximum allotted load 

of 5 amps is reached. If the fuse needs replacement, always replace 
the  fuse  with  same  exact  type  that  was  remove,  unless  otherwise 
instructed by an authorized American DJ

®

 service technician. Use of a 

different type fuse from that which is recommended may cause fire or 
electric shock and will void the manufactures warranty.
•   To reduce the risk of electrical shock or fi re, do not expose this unit 
   rain or moisture
•   Do not spill water or other liquids  into or on to your unit
•   Do not attempt to operate this unit if the power cord has been    
   frayed or broken
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of  

 

   electrical shock and fi re in case of an internal short
•   Disconnect from main power before making any type of connection
•   Do not remove the cover under any conditions. There are no user 
   serviceable parts inside
•   Never plug this unit in to a dimmer pack
•   Always be sure to mount this unit in an area that will allow proper 

   

   

   ventilation. Allow about 6” (15cm) between this device and a wall
•   Do not attempt to operate this unit, if it becomes damaged
•   This unit is intended for indoor use only, use of this product  

 

   outdoors voids all warranties
•   During long periods of non-use, disconnect the unit’s main power
•   Always mount this unit in safe and stable matter

   

   

•   Power cords should be routed so they are not likely to be walked 
   on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by 
   the manufacturer. See page 7 for cleaning details
•   Heat -The appliance should be situated away from heat sources 
   such as radiators, heat registers, stoves, or other appliances    
   (including amplifiers) that produce heat.
•   The fixture should  be serviced by qualified service personnel when:

   

   

    A. The power-supply cord or the plug has been damaged.

    

    
    B. Objects have fallen, or liquid has been spilled into the appliance.
    C. The appliance has been exposed to rain or water.
    D. The fixture does not appear to operate normally or exhibits a 
   

  

  marked change in performance.

General Instructions:

To optimize the performance of this product, 

please read these operating instructions carefully to familiarize your-
self with the basic operations of this unit. These instructions contain 
important  safety  information  regarding  the  use  and  maintenance  of 
this unit. Please keep this manual with the unit, for future reference.

Unpacking:

Thank  you  for  purchasing  the  Orbitron™  by  American 

DJ

®

.  Every  Orbitron™  has  been  thoroughly  tested  and  has  been 

shipped in perfect operating condition. Carefully check the shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the 
carton appears to be damaged, carefully inspect your fi xture for any 
damage and be sure all accessories necessary to operate the unit has 
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Do not return this unit to your dealer without fi rst contact-
ing customer support. 

Introduction:

The  Orbitron™  is  a  unique  intelligent  fixture  with  a 

rotating head unit. This unit may be operated in three modes; DMX-512, 
Stand-Alone, or Master/Slave. The Orbitron™ comes with several build 
in programs and is best used in multiples of four or more. This piece is 
best used with a fog or haze machine to enhance the beam output. An 
optional MINI/C black out controller may be purchased separately. 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide set up help and to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. Service Hours are Monday through Friday 9:00 
a.m. to 5:00 p.m. Pacifi c Standard Time.

Voice:   

(800) 322-6337

Fax:

(323) 582-2610

E-mail: 

[email protected]

Warning! 

To prevent or reduce the risk of electrical shock or fi re, do 

not expose this unit to rain or moisture. 

Caution!

 There are no user serviceable parts inside this unit. Do not 

Caution!

Caution!

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact your nearest American DJ

®

 dealer.

  Orbitron™  

 

 

     General Information

Summary of Contents for Orbitron













Reviews: