American DJ Orbitron User Instructions Download

Page: 11 / 12

©American DJ® - www.americandj.com - Orbitron™ Instruction Manual Page 21

©American DJ® - www.americandj.com - Orbitron™ Instruction Manual Page 22

ONE YEAR (365 DAYS) LIMITED WARRANTY

A. American DJ

hereby warrants, to the original purchaser, American DJ

products to

be free of manufacturing defects in material and workmanship for a period of 1 year (365
days) from the date of purchase. This warranty shall be valid only if the product is purchased
within the United States of America, including possessions and territories. It is the owner’s
responsibility to establish the date and place of purchase by acceptable evidence, at the
time service is sought.

B. For warranty service, send the product only to the American DJ

factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ

will pay return shipping charges only

to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ

shall have no liability whatsoever

for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is
modifi ed in any manner which American DJ

concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than
the American DJ

factory unless prior written authorization was issued to purchaser by

American DJ

; if the product is damaged because not properly maintained as set forth in

the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specifi ed above, American DJ

will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ

under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ

. All products covered by this war-

ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ

reserves the right to make changes in design and/or improvements upon

its products without any obligation to include these changes in any products theretofore
manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ

in connection with this product, includ-

ing warranties of merchantability or fi tness, are limited in duration to the warranty period
set forth above. And no warranties, whether expressed or implied, including warranties
of merchantability or fi tness, shall apply to this product after said period has expired. The
consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ

be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to American DJ

Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.

H. Lamps are not covered under this or any other warranty either written or implied.

Orbitron™

Warranty

The  charts  below  details  the  Master/Slave  setting  for  Master/Slave
configuration.  Use  this  configuration  when  you  will  be  using  two  or
more  fixtures  in  a  Master/Slave  configuration.  The  Master  -  Head  1
settings should only be used once.

Dipswitch Functions

1 2

1 : Pan Inverted
2 : Tilt Inverted

5 1 2

Function Buttons Key

1 2 3

1 Function Key : F01 And F02 And DMX Address Change Key
2 Up Key

: DMX Address Up Counter

3 Down Key : DMX Address Down Counter

Master/Slave Settings

F 0 1
F 0 2

0 0 1