American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 16
American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 15
Nucleus PRO
Operation
on pages 6-8 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 10 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons to choose either OFF or ON, and
press ENTER, then press and hold MENU for 3 seconds to con-
firm.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Show Mode:
In this mode you can choose 1 of 18 show modes to
run.
1. Tap the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER then press and hold MENU for 3 seconds to
con firm. See pages 10-11 for more info.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Nucleus PRO UC3 Control
Blackout Blackout the unit
Function
1. Synchronous Strobe in white
2. Asynchronous Strobe in whtie
3. Sound Strobe in color
Select color(1-16)
1. Red
2. Green
3. Blue
4. White
5. Red+Green
6. Red+Blue
7. Red+White
8. Green+Blue
9. Green+White
10. Blue+White
11. Red+Green+Blue
12. Red+Green+White
13. Red+Blue+White
14. Green+Blue+White
15. Red+Green+Blue+White
16. Color change by sound
Select
Show(1-18)
Mode
Sound
(LED OFF)
Manual Color
(LED ON)
Show(LEDslow
blinking)
