![background image](http://html1.mh-extra.com/html/american-dj/nucleus-pro/nucleus-pro_user-instructions_2922809005.webp)
American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 10
American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 9
Nucleus PRO
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Press the either the MENU, UP, or DOWN buttons until
“
ADDR
” is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
CHND -
This will let select your desired DMX mode.
1. Press the either the MENU button until “
CHND
” is displayed,
press ENTER. Either “
4CH
”, “
18CH
” or “
22CH
” will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “
SLND
” is displayed, press
ENTER. Either “
MAST
”, “
SL 1
” or “
SL 2
” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE:
In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “
SL 2
”, the fixtures will
now have contrast movement to each other.
SHND: SH
0
-
SH17
- Show modes 0-17 (Factory programs).
Show mode can be run with sound activity or without. For show
Nucleus PRO
System Menu Chart
MENU
Blackout Mode " No Blackout "
Blackout Mode " Yes Blackout "
LED off
LED on
Inversion
Normal
Sound Mode on
Sound Mode off
Slave mode " 2 Light Show "
Slave Mode " Normal "
Channel Mode
DMX512 Address Setting
Manual Mode
Fixture Hours
Self-test
Reset
Master Mode
Temperature