background image

  Nucleus PRO  

 

 

                             Cleaning

  Nucleus PRO  

 

 

                Trouble Shooting

Trouble  Shooting:

  Listed  below  are  a  few  common  problems  that 

you may encounter, with solutions.

No light output from the unit;

1.   Be sure you have connected your unit into a standard 120v wall  
 

 outlet.  

2.    Be sure the external fuse has not blown. The fuse is located on  
 

 the rear panel of the unit. 

3.   Be sure the fuse holder is completely and properly seated. 

 
Unit does not respond to sound;

1.     Low frequencies (bass) should cause the unit to react to sound.
    Tapping on the microphone, quiet or high pitched sounds may
 

 not activate the unit.  

Fixture Cleaning:

 Due to fog residue, smoke, and dust cleaning the 

internal and external optical lenses and mirror should be carried out 
periodically to optimize light output. Cleaning frequency depends on 
the environment in which the fixture operates (I.e. smoke, fog residue, 
dust, dew). In heavy club use we recommend cleaning on a monthly 
basis. Periodic cleaning will ensure longevity, and crisp output.
1.   Use normal glass cleaner and a soft cloth to wipe down the out- 
 

side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.
3.   Clean the external optics and mirror with glass cleaner and a soft  
 

cloth every 20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  
 

30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  
 

back in.

  Nucleus PRO 

                                           Fuse Replacement

First unplug the power. The fuse holder is located next to the power 
cord. Using a flat-head screw driver unscrew the fuse holder. Remove 
the bad fuse and replace with a new one. 

American DJ

®

  -  www.americandj.com  - Nucleus PRO Instruction Manual Page 22

American DJ

®

  -  www.americandj.com  - Nucleus PRO Instruction Manual Page 21

 Nucleus PRO                        22 Channel Mode - DMX Traits

  

Channel    Value 

 

        Function

       

19                                        PAN & TILT MOVEMENT

                        0 - 9                        NO MOVEMENT
                      10 - 29                        MOVEMENT 1
                      30 - 49                        MOVEMENT 2
                      50 - 69                        MOVEMENT 3
                      70 - 89                        MOVEMENT 4
                      90 - 109                      MOVEMENT 5
                    110 - 129                      MOVEMENT 6
                    130 - 149                      MOVEMENT 7
                    150 - 169                      MOVEMENT 8
                    170 - 189                      MOVEMENT 9
                    190 - 209                     MOVEMENT 10
                    210 - 229                     MOVEMENT 11
                    230 - 249                     MOVEMENT 12
                    250 - 255                     SOUND ACTIVE 
       20                                            PAN & TILT SPEED
                        0 - 255                       FAST - SLOW

        

21                                              COLOR MACRO

                        0 - 9                             BLACKOUT
                      10 - 29                             MACRO 1
                      30 - 50                             MACRO 2
                      51 - 70                             MACRO 3
                      71 - 91                             MACRO 4
                      92 - 111                           MACRO 5
                    112 - 132                           MACRO 6
                    133 - 153                           MACRO 7
                    154 - 173                           MACRO 8
                    174 - 194                           MACRO 9
                    195 - 214                          MACRO 10
                    215 - 235                          MACRO 11
                    236 - 255                          MACRO 12
       22                                        COLOR MACRO SPEED
                        0 - 255                       FAST - SLOW

Summary of Contents for Nucleus PRO













Reviews: